You will receive 2 sizes of bookmarks.
2" by 4" that is rotated to fit inside most 4x4 hoops
2" by 6" that fits most 5x7 hoops
Instructions included at the bottom of this page!
Includes the following formats: PES, JEF, DST, EXP, HUS, XXX, VP3, VIP, SEW
PLEASE be sure to check your hoop size to make sure the design will fit BEFORE purchasing!
I will NOT issue a refund if you purchase the wrong size/design for your machine.
This is a machine embroidery design.
This is a DIGITAL FILE!
You will NOT receive a physical object.
If you need a different format please contact me!
Most programs, you can open the design in PES and resave in your format.
The designs sold in this section are embroidery design files for an embroidery machine.
THEY ARE NOT PATCHES.
You MUST have an embroidery machine to use these designs.
You also MUST have software and know how to transfer the design from your computer to your machine. I'm sorry but I can not offer any software or machine help.
You are free to use the designs for items for sale.
(please do NOT use our photos of items stitched out--the digital view is fine)
You may not sell, copy, share or trade the actual design itself in any way.
We do not recommend resizing or altering the design in any way.
We are not responsible for poor quality of the stitch out of the design if you alter it in any way or resize it.
You are allowed to merge the design with other designs and sell items with the design stitched onto it. You may NOT merge the design and sell any or part of it in any way as a digital file.
NO REFUNDS due to the digital nature of these designs!
Step 1: hoop tear away stabilizer and stitch placement stitch
Step 2: lay felt or vinyl over placement and stitch next outline
Step 3: At this point you can add a name or skip to the next step
Step 4: remove hoop, place a second piece of felt or vinyl on the back of hoop to cover stitches (pretty side facing down). Use masking tape or basting spray to hold it until after stitching. NOTE: if using vinyl on the back, float a piece of tissue paper under the hoop before stitching last step so it will glide easily on your machine. Vinyl has a gripping texture and can cause stitching errors and/or thread knots underneath.
Step 6: stitch last step
Step 7: remove hoop and your work from hoop, trim 1/8 inch from the stitches around the design (careful not to cut too close to stitching)
Step 8: using a crop-a-dile, punch a hole at the top where the circle stitch is located. Add an eyelet and tie a piece of ribbon through the hole